Facebook [External Link]Twitter [External Link]

»

Sort by:  
Per Page:  
Cylinder packing plate 150-190cc: 2mm Cylinder packing plate 150-190cc: 2mm
A high quality, laser cut aluminium packing plate for 150cc type casings. It is 2mm thick. Ideal for use with cranks with 110mm long conrods or to get your squish...
$15.09
Cylinder packing plate 150-190cc: 3mm Cylinder packing plate 150-190cc: 3mm
A high quality, laser cut aluminium packing plate for 150cc type casings. It is 3mm thick. Ideal for use with cranks with 110mm long conrods or to get your squish...
$14.00
Cylinder packing plate 200-225cc: 1.5mm Cylinder packing plate 200-225cc: 1.5mm
A high quality MBD laser cut aluminium packing plate for 200cc type casings. It is 1.5mm thick. Ideal for use with a 60mm stroke crank or to get your squish clear...
$14.00
Cylinder packing plate 200-225cc: 1mm Cylinder packing plate 200-225cc: 1mm
A high quality MBD laser cut aluminium packing plate for 200cc type casings. It is 1mm thick. Ideal for use with a 60mm stroke crank or to get your squish clearan...
$13.48
Cylinder packing plate 200-225cc: 2.5mm Cylinder packing plate 200-225cc: 2.5mm
A high quality MBD laser cut aluminium packing plate for 200cc type casings. It is 2.5mm thick. Ideal for use with cranks with 110mm long conrods or to get your s...
$11.86
Cylinder packing plate 200-225cc: 2mm Cylinder packing plate 200-225cc: 2mm
A high quality MBD laser cut aluminium packing plate for 200cc type casings. It is 2.0mm thick. Ideal for use with cranks with 110mm long conrods or to get your s...
$14.00
Cylinder packing plate 200-225cc: 3mm Cylinder packing plate 200-225cc: 3mm
A high quality MBD laser cut aluminium packing plate for 200cc type casings. It is 3mm thick. Ideal for use with cranks with 110mm long conrods or to get your squ...
$11.86
Cylinder packing plate 200-225cc: 4mm Cylinder packing plate 200-225cc: 4mm
A high quality MBD laser cut aluminium packing plate for 200cc type casings. It is 4mm thick. Ideal for use with cranks with 110mm long conrods or to get your squ...
$15.09
Cylinder stud Cylinder stud
Standard single cylinder stud for all Lambretta Series 1-3, DL/GP models. You need four per engine or order our complete cylinder stud kit (...
$2.49
Cylinder: 175cc Cylinder: 175cc
Replacement cast iron barrel for worn out cylinders or as a starting point for tuning. Bore 62 mm, stroke 58 mm, cast iron. Combined with one of our 175cc pistons...
$99.99
Cylinder: 200cc Cylinder: 200cc
This cylinder was fitted as standard to the Indian GP 200. The barrel was modified to stage 4 specifications by increasing the port timings without loosing suitab...
$99.99
Drain, level, and breather plug gasket Drain, level, and breather plug gasket
This fiber gasket sits between the level, drain and filler plugs to provide a seal. You need 3 per crankcase side....
$0.54
Engine bump stop rubber Engine bump stop rubber
This rubber item sits in a hole on the top of your casing and supports your frame on your engine when the rear shock is removed....
$2.75
Engine bump stop washer Engine bump stop washer
This washer sits in the engine casing underneath the bump stop rubber....
$1.75
Engine circlip kit Engine circlip kit
This handy bagged kit contains the correct circlips you need to overhaul a Lambretta engine. It does not include the large mag housing circlip or gearbox end plat...
$8.99
Engine frame cones (large), pair Engine frame cones (large), pair
This pair of metal cones is made for motors with the large engine mounts and sit in the two holes on your frame and the engine bar goes through the middle of them...
$5.25

Result Pages: [<< Prev]   1  2  3  4  5 ...  [Next >>]  Displaying 49 to 64 (of 108 products)